CHICHI-MIO

Cheap Solvent Weld Pipe

View previous topic View next topic Go down

Cheap Solvent Weld Pipe

Post by Admin on Sat Sep 17, 2011 6:37 pm

I spotted this listing yesterday by an ebay seller closing his business ...

The pipework and fittings is only 1.5 inch but fine for a QT etc if anyone is interested. Arrow http://www.ebay.co.uk/itm/10x-SOLVENT-WELD-WASTE-PIPE-/220852375141?pt=UK_DIY_Materials_Plumbing_MJ&hash=item336bd3ce65#ht_553wt_1139

_________________
MIO/CHICHI
avatar
Admin
Admin

Posts : 1970
Join date : 2011-02-08

http://mio-chichi.forumotion.co.uk

Back to top Go down

Re: Cheap Solvent Weld Pipe

Post by alank on Sun Sep 18, 2011 3:31 am

Did you buy it Mio?, just over £1 per length, not bad.

alank

Posts : 247
Join date : 2011-08-03

Back to top Go down

Re: Cheap Solvent Weld Pipe

Post by Admin on Sun Sep 18, 2011 3:37 am

alank wrote:Did you buy it Mio?, just over £1 per length, not bad.

I missed the end of the auction Alan Embarassed buried in my Astrological studies Rolling Eyes But Tina has just re-listed the Hailea Pump which I`m about to buy now. Very Happy

Hope the Giant TT will handle 20,000lph.




_________________
MIO/CHICHI
avatar
Admin
Admin

Posts : 1970
Join date : 2011-02-08

http://mio-chichi.forumotion.co.uk

Back to top Go down

Re: Cheap Solvent Weld Pipe

Post by alank on Sun Sep 18, 2011 5:21 am

Where are you in the country Mio? We are not far from Bolton where the auction was.

alank

Posts : 247
Join date : 2011-08-03

Back to top Go down

Re: Cheap Solvent Weld Pipe

Post by Admin on Sun Sep 18, 2011 5:30 am

alank wrote:Where are you in the country Mio? We are not far from Bolton where the auction was.

I knew you lived close to the Auction site Alan ... and why I posted it ...

I live in Wales which would have meant him cutting the lengths in half and the length I need the most was the full length to hard pipe the RBD to the pump via a 45 degree elbow IF this will breach the 30 inch height of the show vat.

_________________
MIO/CHICHI
avatar
Admin
Admin

Posts : 1970
Join date : 2011-02-08

http://mio-chichi.forumotion.co.uk

Back to top Go down

Re: Cheap Solvent Weld Pipe

Post by DaveB on Sun Sep 18, 2011 10:52 pm

Hi all

Have any of you guys considered white UPVC pipe. I know it don,t look too proffesional. But if you are not too botthered what it looks like or it is hidden out the way, It is about half the cost of the BLack. I have used it on sand filters with a back pressure of over 1.0 bar & upto 1.5 bar and it has never degraded in over 10 years. However. The pipe should be well clipped as it is thinner and will not be as good at self supporting. Ie keep those additional stresses down and there should be no problems. I have aslo used the swept and elbow bends too without problems best Regards Dave
avatar
DaveB

Posts : 589
Join date : 2011-06-06
Age : 62
Location : Tyne & Wear England

Back to top Go down

Re: Cheap Solvent Weld Pipe

Post by alank on Mon Sep 19, 2011 6:04 am

Hi Dave, I use the white pressure pipe in the link on the top post.

alank

Posts : 247
Join date : 2011-08-03

Back to top Go down

Re: Cheap Solvent Weld Pipe

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum